How To Easily Fix a Corrupted Hard Drive On Windows 10

Since the affected computer can’t boot to Windows, you need to boot computer with bootable disk. On this PC, open Disk Management tool and assign a drive letter to the connected drive, if not assigned already. You may also try the automatic repair option to try fixing the problem. Turn off the system, disconnect the Windows installer media and then turn it ON.

• If you have a Windows 10 PC, you might occasionally see the notorious “scanning and repairing drive” message.
• Jordan Jamieson-Mane is a freelance content writer with a passionate interest in technology.
• Unfortunately, MiniTool Partition Wizard doesn’t have this feature.
• “C” is the drive letter of your Windows installation drive.

Click Hard Disk Drive option and select the target corrupted external hard drive, then click Scan. Usually you can press F12 to enter into the Boot Menu. Next you can press the Up/Down Key on the keyboard to choose the bootable USB drive or system repair disk, and hit Enter. The disk recovery wizard will ask you to select a partition on the hard disk for scanning. If the hard disk is visible but not working properly due to faulty drivers, you can roll back those drivers if that option is available.

Risks of installing a new hard drive

Once you see the option in the Start menu, right click on it and select “Run as Administrator”. When you successfully open the Command Prompt, you can follow the steps in Method 2 to execute CHKDSK commands. 2.Expand Maintenance then under Drive status see the current health of your drives. AVG TuneUp schedules regular maintenance to clear out the stuff drivers download that commonly bogs down your PC.

After you have run the assign letter X command note that diskpart responds with a message stating the desired assignment was completed. With the utility now running type at the DISKPART prompt list volume as shown below. Select Change Drive Letters and Paths as shown below.

How to Fix the “There’s a Problem With This Drive” Error

Then, how to fix a disk read error occurred on a laptop accordingly? Boot from a [Link] boot disk or USB stick and open a command prompt. Then run the command “bootrec.exe /FixMbr” and then “bootrec.exe /FixBoot”.

Right-click the target partition and select Check File System option. In the new window, you can click check & fix file system error option, and click Start button. MiniTool Partition Wizard will automatically scan and fix detected file system errors on the disk. Restart your computer and Windows will automatically run CHKDSK on reboot to scan and fix hard drive errors. ScanDisk, which is a Windows utility, can be used to repair errors and restore errors on your hard drive.